Technical specification:
- supply voltage – 3x400V/50 Hz
- power of the main engine – 0.75 kW
- feed motor power – 0.22 kW
- motor power for the rear sharpening angle – 0.25 kW
- power of the motor for the lateral inclination of the front side of the teeth – 0.75 kW
- hydraulic pump motor power – 1.75 kW
- motor power of the coolant pump – 0.9 kW
- motor power of the cooling oil vapor filter – 0.55 kW
- Total installed power – 4.2 kW
- Teeth profile – all standard tooth shapes, stellated and sighted
- Diameter of saws – from 100 to 610 mm
- Diameter of the hole of the saws – from 10 to 120 mm (standardly equipped with bushings with a diameter of 25.4, 30, 45, 50 and 70 mm
- Thickness of saws – maximum up to 8 mm
- Step of the teeth – from 8 to 70 mm
- Maximum permissible difference in the height of the teeth – 3 mm
- Peripheral speed of the sharpening wheel – 25 m/s
- Puck revolutions – 3400 min-1
- Capacity – 20 teeth/min
- Front cutting angle – 0-40
- Lateral inclination of the front side of the teeth – 0 to 450
- Grinding disc – 125 mm diameter, 2mm abrasive area thickness, 13 mm total thickness and 32 mm bore
- machine dimensions – 1945 x 1417 x 2000(H) mm
- weight – 1150 kg
For all configuration options contact us!
