Technical specification:
- supply voltage 3x400V/50 Hz
- main motor power 0.75 kW
- feed motor power 0.22 kW
- motor power for the rear sharpening angle 0.25 kW
- power of the motor for the lateral inclination of the front side of the teeth 0.75 kW
- hydraulic pump motor power 1.75 kW
- coolant pump motor power 0.9 kW
- motor power of the cooling oil vapor filter 0.55 kW
- Total installed power 4.2 kW
- Teeth profile all standard tooth shapes, stellited and sighted
- Diameter of saws from 100 to 810 mm
- Diameter of saw holes from 10 to 120 mm (standardly equipped with bushings with a diameter of 25.4, 30, 45, 50 and 70 m
- Thickness of saws up to 8 mm
- Teeth pitch from 8 to 70 mm
- Maximum permissible difference in the height of the teeth 3 mm
- Peripheral speed of the sharpening wheel 25 m/s
- Puck speed 3400 min-1
- Capacity 20 teeth/min
- Front cutting angle 0-400
- Lateral inclination of the front side of the teeth 0 to 450
- the sharpening wheel is 125mm diameter, 2mm abrasive zone thickness, 13mm overall width and 32mm bore
- machine dimensions 1920 x 1606 x 2000(H) mm
- weight 1200 kg
For all configuration options contact us!
